Courtesy of B & D Kleinschmidt, 196 South Seymour St., Fond du Lac, Wisconsin 54935 This is one of the scenes of the horsepower in use at our show in 1966. Ponies furnished by Ray Cook of Evansville, Wisconsin.
B & D Kleinschmidt
Courtesy of Neil R. Erickson, 2113 E. Wheeler Road, Midland, Michigan 48640 This is our Advance-Rumely Engine that we believe to be a 20-60 horsepower. It has the ''Advance'' picture on the smoke-box door and is lettered M.
Neil R. Erickson
Courtesy of Robert G. Schaudel, King Mountain Ranch, Birney, Montana 59012
Robert G. Schaudel
Guy P. Laubis
Courtesy of Harry Hall, 223 High St., S.E., Albuquerque, New Mexico 87102 Visitors and Engineers watch and listen as a 65 hp. Case talks ''real loud'' to further tightening of the adjustment on the Prony-Brake. Annual Antique Engine and Thresher's Associa
Courtesy of R. Dayton Nichols, 6128 Route 5, Stafford, New York 14143 This is Charles Hitchcock's Steam Engine with the following information: Boiler - 20 hp. Leffel Buttstrap, 1929 made in Springfield, Ohio. He purchased it in Port Byron, N. Y. where it
R. Dayton Nichols
Courtesy of Herbert Huck, R.D.1, Lowell, Ohio 45744 This is a picture of the sawmill yard. This picture was taken in the early twenties, in the horse and buggy days. Note the buggy above the barn, also the men rolling logs up to the mill. This is where I
Courtesy of D. E. Rutter, 35 Newlands Lane, Chichester, Sussex, England Aveling and Porter 8 Ton Roller No. 10632 Built 1923 ''Thor'' Owned by P. J. and T. M. Abbott of Lyndhurst.
D. E. Rutter
Courtesy of Jacob P. D. Tiessen, R. R. 1, Abbotsford, B. C, S. Frazer This steam locomotive came through Abbotsford last summer. I looked that engine over from bottom to the too. The cylinders are underneath. You will notice the. side rods only. I was in
Jacob P. D. Tiessen
Courtesy of Robert G. Schaudel, King Mountain Ranch, Birney, Montana 59012 These pictures - one from each side - of an Avery separator, No. 21243. It is one of the first steel separators Avery built. I completely rebuilt this separator so it looks and run