This is a Huber 18 HP Contractor Type Engine bought in 1914. Engine No. 10507. My father and I ran this engine till 1926, threshing wheat and soybeans, cow peas, shedding and silo filling, county road work. The Tool Box and coal bunker rusted off and I ne
Allan Miller is my father-in-law. He just recently moved out to Seattle, Washington. This picture was taken May 15, 1917, on the Balden Ranch No. 8, near Ellendale, N.D. The tractor is a 30-60 Aultman Taylor, pulling a John Deere eight-bottom breaker plow
Here is a picture of the 1/3 size free lance model I just purchased from Lawrence Griesemer, Swanton, Ohio, who built it. It has a3'x 4' cylinder, 16' flywheel, 27' drivers, carries 100 ob. steam and 7' 9' over all. It runs and pe
Here is a picture of an engine and plow that I purchased some time ago. Before I got possession, it became involved in a tangled estate. While collecting information about the outfit I found the original of this picture and had some reprints finished and
(Photo by Leo R. Clark, 105 Harvey Street, Washington, Illinois)
Leo R. Clark
Model 'G' 20-40 Museum Collection, Honeoye Falls, 1962 Reunion.
1918 Holt 45 crawler pulling big fan Mikkelson's August, 1961, owned by Carl Kirsch, St. Paul, Oregon.
This is my 20-35 late style OILPULL. This is a model M and a very fine old tractor it is. You will notice on the buzz saw picture, that the front end is offset which is easily done and very handy in lining up. I have operated steam and gas tractors since
My 30- 60 Type Rumely Oil Pull Tractor 1911 and 36-60 Rumely separator 75th anniversary of Hecla, South Dakota, parade June 28, 1061
22-40 Hart Parr at the 1962 Pioneer Reunion. 22-44 Minneapolis in the background.