I'm better known among my friends as 'Little Hynie' a Chief Engineer of Goeman's and Corley's Outfit. Pictured is a machine not just two panels put together. This machine has all working parts same as the Case people made. I could not own or buy
Sawyer Massey Engine and Minneapolis Separator. This outfit belongs to Mr. Ken Scott, Glen Even, Sask., Canada. They are preparing to thresh oats, September 1959.
Mr. Ken Scott
Pictured above is Calvin's outfit working together for the first time. 40 hp Case Engine No.34967 belted to 28' Case steel separator threshing wheat.
Threshing with the Frank Frahm outfit in 1958. Engineer Henry Michelsen at the throttle.
This picture from Calvin shows L. M. wade of' Tracy, California, separator man for the day at the bagger. Taken September 27, 1959.
My latest restoration, a 10 hp Russell, No. 8798, built 1896. This is a straw burner with water front extending to front end of boiler. Has 2 rear doors. A rather rare Russell, I think.
26 hp Samson gas engine, built in 1890 by Samson Iron Works of Stockton, California, and still in running order. Taken at P. O. Millers, July 1959.
Part of the early day gas power at the Hastings Show, several small gas engines on truck behind Oil Pull. A real good show!
This is my outfit and myself. 1/3 scale of 65 hp Case, 4' engine, water tank and separator mounts on a 2 wheel low trailer with special axle.
This is my outfit taken in the early 20's. 16-30 Oil-Pull and 26' Case later traded for 20-35 Oil Pull and 28' Rumely. I'm standing by tractor.
Elmer Larsons 1/3 scale Oil Pull (1912 Model).6 years of spare time and about $650. worth of parts. 3 3/8 in. bore, 4 in. stroke, about 2 hp. It sounds like the big one which he also has. I never saw a model gas tractor before. This one is a honey!
My 8-16 International tractor 1921 Model running a forage blower to blow grain. Picture taken August 1958.
This is a Case 40 hp that I ran in five parades in '57 in Badger, Lake Norden, Esterline, Arlington and Lake Preston. This engine is like new and has been run only 2 years in threshing. Pictured on the engine with me is my son, grandson and two neighbor b
Pictured is a tractor made by Bill Hunter. It's a copy of Nichols and Shepard. I ran it Homecoming Day in the parade. I pulled a buggy behind with 2 Indians riding in it. Mr. Hunter has built railroad locomotives also. I sold this tractor for $600.
This is a picture of Joe Karr and crew taken some time in the 'Roaring 20's' Joe is pictured with his hand on spoke of the 20 hp Double Nichols & Shepard engine. The four men in center of picture will have to go nameless as I don't know any but the m
Picture taken when I visited Antique Engine & Thresher Association show. They let me fire up this 1885 Model engine and run it around for fun.
Small steam traction engine, length over all 24', diameter of rear wheels 5. Clutch in the flywheel, slip eccentric reverse. Cylinder bore ' x 1-1/16' stroke.
Laurence sent us this picture with dimensions as follows: Length of boiler 63'xl2', length of smoke stack 21', 11-1 Hues x 35' long. Front wheels 4' x 18'; Rear wheels, 7'x27', flywheel 4'x16'. Cylinder bo
Henderson's Shock Loader taken in 1918 on the Henderson farm two miles south and four miles east of Halstad, Minnesota. Mr. Henry Henderson has been deceased for several years.