A beautiful 40hp Peerless on a saw-mill at Pion-Era, Saskatoon, Sask, 1959.
Mr. Richard Rornig, Rothsay, Minnesota, and his Case. We have no further information and we are not sure we have his name spelled right, however, it is a nice clear picture and we like that. Elmer.
Wade Brothers 16 hp D.C. Nichols and Shepard pulling a six bottom Avery plow at their farm near Whitewater, Wisconsin.
Reeves 32 hp C.C pulling a 14 bottom plow at Saskatoon, Canada in 1956.
My grandfather's Huber Threshing Rig moving on Rye Beach Road west of Huron, Ohio, in 1904. Rig was owned by John F. Rhinemiller who was accidentally killed January 10, 1912, at a railroad crossing near his home. The outfit was operated by two sons, Arthu
This is Jiggs with his recently acquired Baker, 21-75. He's very proud of it as he tells us he has been a steam enthusiast all his life -- he'll be 50 this year. His father operated a saw-mill, shingle mill and threshing machine.
Aultman Taylor engine belonging to Harry Woodmansy of Dowling, Michigan. This was taken at the Huntertown, Indiana, meet 1957. I was in the height of my glory piloting this engine. Harry's pipe made more smoke than the engine if you did not put more than
Let your light shine . . . and Tom Me Bath could throw forth quite a bit of light with all these fine table lamps made from whistles, pop-valves and lubricators. He tells us bronze bells make novel shades but are hard to find, We think the lamps are very
3 inch scale case (that's all the information we have, sorry!)