Here is a picture of me and my little steam engine. I would enjoy seeing it appear in your magazine. His a scale model Case with cylinder bore 3-7/8', piston stroke-5', height-58', extreme widtti-47', length-9'. I have been working on
36-120 Rumely plain Engine. Left side.
Mount Pleasant 1960. Stan Mathew, Engineer.
Here is a picture of a partially restored up and down sash mill which was built around this old crank casting. It was uncovered from where it was abandoned a few years after installation in 1865. At the left hangs a whip saw, the first means of making boa
This picture sent in by Ed and he says he knows nothing about it.
Case 65,No. 3361. It is in fine shape.
Here is a picture of what I think is the largest engine in Wisconsin. The boiler is 39 inch dia.- inch shell, butt strap, working pressure 175 lbs. 782 inch flues. It is a double Rumely 7x12. I got this engine east of Birchwood, Wisconsin from Jim Martin
Here is a picture of a Westinghouse Traction Engine of 1890 vintage. This rig was owned by Ed Swint, whom my father worked for when a young man. This separator was a hand feed but one of the first in the district to have a blower on.