The Historically Significant Gestring Wagon Co.

1 / 10
This "white" Gestring wagon likely dates to a period between 1885 and 1890. Numerous features point to its use as a one-of-a-kind promotional vehicle.
2 / 10
This original Gestring wagon was purchased new in 1919 from a retail dealership in Searcy, Ark. It retains the original spring seat, bows and tongue.
3 / 10
The Gestring burial plot in St. Louis.
4 / 10
Carrying the faded remnants of early 20th century advertising, this old St. Louis structure still stands down the street from the Gestring factory site. The building was home to the Mound City Buggy Co., a retail outlet for horse-drawn vehicles.
5 / 10
This rare Gestring letterhead, dated 1877, may be the earliest surviving material from the firm. At that time, Casper Gestring had been building wagons for about 20 years.
6 / 10
The background and floral colors in this image have been digitally restored to help show the distinctive appearance this wagon would have had as a one-of-a-kind promotional vehicle.
7 / 10
Missouri Department of Transportation archaeologists work to uncover and preserve artifacts that will shed light on the early transportation industry in St. Louis. The white limestone shown here was the foundation of the Gestring wagon factory, which dates to 1866.
8 / 10
This 1876 fire insurance map shows the floor plan of the Gestring factory.
9 / 10
The planned east-west interchange and approach to the new bridge across the Mississippi River. The oldest sections of the Gestring factory site (circled) will be covered by the new construction.
10 / 10
This 1876 illustration shows the Gestring factory in St. Louis.

As I stood in the middle of a strangely quiet and virtually abandoned city block, for a moment I could imagine the sights and sounds of old growth timber being sawn. At my feet, shavings from a drawknife lay on the ground. Swept into a pile near a dusty stairwell, the shavings served notice that someone would be returning to finish the job. The sound of hammers and anvils rang out while molten metal fireworks showered a dirt floor.
Around the corner, workers stacked lumber in sheds to dry and complete the seasoning process. At the back of the lot, a clerk inspected a supply of custom-fabricated parts. Nearby, a painter lifted his brush and stepped back from his work. Wiping his brow, he surveyed deep blue pinstripes freshly laid on the wooden wheel. His craft was a specialized form of commercial art; his canvas could literally travel the world.
Out front, horse-drawn streetcars, wagons and carriages filled the north-south thoroughfare. My eyes fixed on a large, low-slung dray rumbling south toward the riverfront levee and docks. As it passed by, I looked up to see workers wheeling two of their latest creations out the door.    
Captivated by the vision, I could feel my daydream settling in. But before I could picture anything else, the ground began to shake, followed by a rush of wind and the growl of an engine brake on a passing tractor-trailer rig. It was enough to jolt me back to reality, but I remained intensely curious as to what this area once looked like. I was on the grounds of what was once a thriving wagon manufactory in St. Louis, “Gateway to the West.”
Today, the site is part of a recently completed archaeological dig conducted by the Missouri Department of Transportation (MoDOT). Numerous excavation holes and trenches permeated the property, exposing 19th century limestone foundations. Remnants of brick forges dotted the terrain with significant samples of the last coal used. The dig also uncovered early millstones (used to grind paint), slate roofing materials, heavily corroded metal wagon parts, water closets, cisterns and countless handmade bricks. As a historian of the early American transportation industry, I’m accustomed to the challenges of exploring the mostly forgotten pieces of our past. Usually, I’m the one doing the searching. This time, the story came looking for me. 

Digging for answersIn December 2009, I received a call from the MoDOT archaeological staff seeking information and materials related to a dig near Broadway, Mound and Brooklyn streets in St. Louis. The state had acquired the property as part of a Mississippi River bridge construction project. MoDOT’s historic preservation group researched, excavated and catalogued remains of several 1800s-era businesses that had operated at the site.
Among those of specific interest was the Gestring Wagon Co. (pronounced guess-string), established in the 1850s. Although the company’s original buildings were razed years ago, the firm is historically significant for a number of reasons, including the fact that the Gestring earthworks remained largely undisturbed since the company ceased operations midway through the Great Depression of the 1930s.
Equally notable, this horse-drawn vehicle company not only survived the transition into the automobile era, but also outlived many prominent early wagon makers. It’s an especially remarkable achievement since, in more than 75 years of operation, the company never adopted steam power or other tools of mass production employed by many vehicle builders. Every Gestring wagon was handcrafted by trained artisans who carried on the same basic construction principles of the earliest American wagon makers. 

Building a legend on wheels
Established during the mid- to late 1850s by Casper Gestring, the company had a German heritage. As a young man in Prussia, Gestring heard of opportunities in America and set his sights on the New World. His voyage across the Atlantic was the first test of his convictions, as the grueling journey lasted 13 weeks.
As a young man in his 20s, Gestring soon found his way to St. Louis where he worked as a blacksmith. In a shop on the northeast corner of Broadway and Brooklyn, he shod horses for the Union Army while also engaging in traditional repair and fabrication work. With steady business and a family to support, it wasn’t long before Gestring added wagon-making to his list of products and services. In fact, according to a 1935 New York Times interview with grandson Henry Gestring, the firm was busy building wagons for the Union Army during the Civil War.
By 1865, city records show Gestring operating under the name Gestring & Co. Henry Luedinghaus, Gestring’s first partner, was destined to make his own mark in the wagon trade. Not only would his namesake brand become known as a major wagon manufacturer, even branching into production of motor trucks, but Luedinghaus eventually merged with another legendary St. Louis maker: the Espenshied Wagon Co.  
With each partner holding strong ambitions and staunch business opinions, the alliance between Gestring and Luedinghaus was short-lived. By 1866, the two parted ways. Gestring left his original blacksmith shop and moved across the street to the southeast corner of Broadway and Brooklyn, taking on Henry Becker as his associate. The new company, Gestring & Becker, got off to a solid start. The partnership lasted about 15 years, into the early 1880s.

Ancient remains
According to oral histories passed down in the Gestring family, part of a huge American Indian mound was removed before the factory expanded over the new Broadway property. The mound covering the area was the largest in the city, measuring 319 by 158 feet and 34 feet tall, comparable to a three-story building covering close to the same area as an NFL football field.
Because the mound was a significant American Indian landmark, the act of dismantling it generated a fair amount of interest. The massive earth works are estimated to have been built between 700 and 1400 A.D. by the Cahokia Indians for burial and ceremonial purposes. The large number of such mounds in 19th century St. Louis prompted the city’s nickname, “Mound City.” Thomas Easterly, a daguerreotype photographer of the era, captured images of some of the early mounds as well as the final leveling of this particular “Big Mound” in 1869.
By 1875, on the eve of America’s centennial celebration, Gestring’s business had grown far beyond his humble blacksmith beginnings. The company stretched over the entire half-block bordered by Broadway, Mound and Brooklyn streets. The factory was housed in a large, three-story brick structure with blacksmithing in the basement. Upper floors were used primarily for painting and woodworking. An additional multi-story building on the back of the property was used for extra woodworking projects and storage. Other structures on the site supported additional blacksmith work and lumber storage. Gestring also owned property on Broadway, just north of the main facility. Most of the facilities on that land housed lumberyards and blacksmith works. 
Surrounded by churches, schools, planing mills, a chair factory, food market, stove works and marble company, the Gestring brand took shape within sight of legendary wagon makers Weber & Damme and John Luking. His former partner, Henry Luedinghaus, had a large factory across the street, and the highly acclaimed Joseph Murphy Wagon Works was just a few blocks south. 

Keeping quality first, the old-fashioned way
Competition between vehicle makers often highlighted their distinctly unique innovations. In 1878, Gestring collaborated with James Fullerton, also from St. Louis, and won a patent for an improved axle skein. That design feature remained an integral part of Gestring products well into the 20th century, yet another indication of the company’s commitment to quality, innovation and aggressive competition. The commitment to quality did not slow production. Gestring production numbers in the 1880s matched and often exceeded the work of other St. Louis wagon makers. In fact, Gestring’s 1882 output was valued in excess of $100,000 – more than the total combined output of key St. Louis makers like Joseph Murphy and Louis Espenschied for the same general timeframe. 
While the numbers aren’t comparable to those of large-scale makers like Studebaker, Bain or Peter Schuttler, they remain significant for mid-sized firms. Luedinghaus, Weber & Damme, and Gestring all vied for government wagon contracts in the 1880s, going head-to-head with the huge factories of Moline, Alexander Caldwell (Kansas), Studebaker Bros., and Austin, Tomlinson and Webster (Jackson wagons). 
While mechanization and steam power offered the opportunity to increase production, it was an area that consistently separated Gestring from many other makers. Throughout the company’s history, the Gestrings remained convinced that quality was synonymous with personal attention to detail in totally handcrafted vehicles. It was a determination that kept costs manageable and orders consistent, even in slow economic times.
In the early 1890s, St. Louis, like most of the rest of the country, was riding a wave of economic optimism. Gestring continued to expand his operation. The good times were about to come crashing down, though, as railroad and bank failures throughout the decade created financial instabilities, hampering economic progress for the majority of the country. 
When Casper Gestring died in 1903, he left a legacy of a prosperous, well-managed business. His family picked up the mantle of personalized quality and carried it well into the new century. Production continued at full capacity. By 1909, the company’s workforce of 60 produced about 1,500 vehicles a year. Gestring Wagon Co. ceased operations in 1935, but not before the founder’s great-grandson, William, would officially add his name as the fourth generation to build wood-wheeled wagons. As a boy of 7 or 8, William remembers his father overseeing him as he was allowed to stencil the Gestring name on the last handmade, factory-built wagon in America. 

Gestring leaves lasting legacy of leadership
One more time, I walked the old factory grounds, picked up a few mementoes and shot photos before the setting forever changed. There is a certain amount of irony in the fact that such a strong part of St. Louis’ past will be permanently covered by a new highway and bridge. The old factory sat within an easy walk to the banks of the Mississippi River. Workers there would have been accustomed to the shrill sound of steamboat whistles in a bustling river city. Now, a 21st century bridge will carry travelers on their way to new opportunities. Speeding over the site of so much history, how many will know or care about the roots of progress just beneath them? 
As I mulled over those thoughts, the story unfolded in a new direction, culminating in a visit to Casper Gestring’s final resting place. On a prominent corner in St. John’s cemetery in St. Louis, the Gestring family plot is centered on a large, ornate marble obelisk. Markers nearby bear the names of many Gestring relatives and factory workers. It occurred to me that, even in death, these people shared a bond that the fast pace of mass production and instant gratification seems to have erased from today’s world.
Perhaps Casper Gestring had it right all along. Perhaps there is more to life than filling our days with so much that we struggle to carry the load. Even his wagons were stamped so users would know capacity limits. My eyes followed the lines of the obelisk, gradually moving upward, tracking carvings and corners until I stopped at the uppermost point of the oversized marker. Instantly, I was taken aback. I had been so preoccupied with the headstones and names that I’d overlooked an obvious living metaphor.
There, overshadowing the entire plot, was a giant oak tree standing like an aged sentinel. Hardwoods like that were the heart and soul of Gestring’s life and America’s early transportation history. This colossal memorial had spread its roots and pointed upward with an unfolded canopy. To all who take time to notice, it’s a tranquil and timeless tribute to a time when hard work, quality and integrity weren’t just ad slogans, but a way of life. 
Of the thousands of wagon makers that once existed in the U.S., only a few hundred are remembered today. Even fewer road-worthy products of those companies remain in existence. Almost none have been profiled through detailed excavation studies. So, why all the interest in Gestring? Beyond the MoDOT’s bridge project, the Gestring legacy highlights some of the most significant days of St. Louis’ transportation history. Furthermore, the company was large enough to do contract work for the U.S. military, and it stood shoulder-to-shoulder with leading competitors. Casper Gestring dared to blaze his own path, building every vehicle by hand, and outlasting almost all of his competitors. Gestring knew his strengths, set his course and delivered a heritage and product that’s still making news more than 100 years later. It’s the same kind of commitment that built our nation and the hallmark presence of a St. Louis legend and Mound City maker. FC

David Sneed is a freelance writer, collector, historian, speaker and founder of the Wheels That Won The West® western vehicle archives. Write him at P.O. Box 1081, Flippin, AR 72634;; online at

Farm Collector Magazine
Farm Collector Magazine
Dedicated to the Preservation of Vintage Farm Equipment