LETTERS TO THE EDITOR


| July 2000



FC_V2_I12_Jul_2000_02-1.jpg

A clock worker's morticing machine; a paint pigment grinder

It was interesting to see on the cover of your May issue the picture of a Flint and Walling windmill. We have a Flint and Walling windmill that pumps our water. It was installed in 1916 and has been in operation since then. There is a yellow star on the blade along with the name: R.R. Howell & Co., Minneapolis, Mn. There is also some other wording, too small to read from the ground, and I haven't climbed the tower recently. I think it is patent numbers.

Allen Menter, Faith, SD

Paint Grinder and Mortice Machine Keeping Company

I purchased a grinder like the one pictured in the Letters page in the April issue of Farm Collector. My wife found an article in Early American Life that describes it as a paint pigment grinder. I enclosed a picture of my grinder, along with another rare item: a clock worker's morticing machine.

Bryan Clothier,  351 County Rt. 24, Corinth, NY 12822

WORKING IN TANDEM

During the period after World War II, from the late 1940s to the early 1960s, farmers in midwest needed tractors with more power. Some solved the problem by taking two tractors - such as two John Deere D's, or two Case L's, or two IH W-9's - and hooking them in tandem, first with self-steering drawbars, and then by removing the front axle of the back tractor, and mounting it on the drawbar of the front tractor. Controls and gauges were mounted where they could be operated from the front tractor. That way, one man could operate two plows at a time, and normally at one gear higher, increasing output.

At the turn of the century, few tandems remain in operation. In recent years, a pair of Minneapolis-Moline U's was shown at Winfield, Kan. William Steinke of Nebraska has restored a pair of International W-9's that will be shown locally. The last time I heard of a tandem being used was 1986: John Heater in Elk County, Kan., used a pair of Massey 98's.