ELEVENTH ANNUAL REUNION OF TRI-STATE HISTORICAL STEAM ENGINE ASSOCIATION, INC.


| March/April 1968



Steam shovel

The steam shovel was a 4 wheel Thew. It was used to strip the dirt off the gravel. The dirt was about 10 feet deep. I fired the shovel and did other jobs that were to be done. B and B Sand and Gravel Company, Winchester Road, Fort Wayne, Indiana.

R.D. 1, Charleroi, Pa., Secretary

As surely as the third weekend in September appears, just as surely do the hills and valleys around Burgettstown, Pa. echo with sounds familiar to certain farming operations that are close to the hearts of numerous steam engine enthusiasts from the tri-state area. Between five and six thousand persons were welcomed to the 11th annual reunion and exhibition of the Tri-State Historical Steam Engine Ass'n., Inc. during the two-day show at the Dean Fullerton farm on September 15 and 16. As is the usual custom, ideal weather conditions prevailed.

Numerous entries, not previously seen in this area, together with the customary amount of machinery regularly shown, and a well-planned program of events, marked the occasion as one of the best to be presented yet. There was something for everyone who attended.

For the occasion, when steam is king, the traction engines on exhibition included the Frick, Peerless, Farquhar, Keck-Gonnerman, Case, Russell, Huber and Groton. All were in operation and took their turn at performing the various chores assigned to them. The crowds were enthralled by the appearance of the beautiful model of a 65 Case shown by Thos. Hatcher and Sons, of New Concord, Ohio. Hubert Spencer and Elmer Allshouse were on hand with their small individually-made traction engines.

Perhaps the most growth occured in the old gas and oil tractor field. These included Rumely Oil Pull, Avery, Hart Paar, IHC (Mogul, Titan, Farmall Regular, Farmall 30), Minneapolis, Fordson, Baker, Caterpillar and Heider. They came from as far away as Erie, even a trailer load of three. They, too, took their turn on belt jobs assigned to them. Twice daily, everything on wheels was paraded around the large barnyard for everyone to see and to photograph. This was indeed a most colorful sight. Daily demonstrations of threshing-baling, sawing, the fan, feed grinding, shingle making, ensilage cutting and clover hulling featured the activities. These operations were repeated several times daily. An abundance of grain made it possible to thresh and bale at frequent intervals. This always is a popular part of the program. This time, our horse-powered baler was operated by a beautiful team of mules owned by Donald Noah, Scio, Ohio, and Charles Alrutz had his attractive team of horses on the water wagon.

A rare entry, indeed, was the appearance of a beautifully restored Size 3  Keystone Steam Well Driller, owned and shown by Sam. R. Redd, Charleroi, Pa. It was in daily operation, making the parade route the first day, and then set up and drilling the remainder of the time. This was an outstanding part of the exhibition.