20-70 Nichols & Shepard engine I used for threshing and various other work in southern Minnesota, being manned or womaned by the fair sex. The young lady on the left was a very efficient engineer and the daughter of an engineer. Taken in 1923. See Mr.. Ya
I spent 15 years at running an engine in Southern Minnesota, threshing corn shelling, sawmilling and any other work an engine could do. After selling out in the year 1925 I had not touched a throttle in all those years until one year ago I had a wonderful opportunity to once again stand on the deck and handle a throttle for three delightful days due to a man who shipped one of the old engines to my town and asked me to help him during three parades which he took part in. I found it was just as natural to pull that throttle again
after over 30 years as though it were only yesterday since I had stepped off the deck. There is no thrill like the feel of power surging through those iron lungs to an old engineer as the old steam engine obeys the hand of her master.
Am enclosing a picture of my 20-70 Nichols & Shepard engine just finishing a job of threshing in 1923. What has become of all the threshers in the state of Minnesota? Seldom see any letters from any of you. Get out your pencils and drop me a line about what threshing is like there now. I have been gone for 19 years and things have changed in that time. Keep the ALBUM coming. I am looking for the next issue already.
HARRY YATES 3775 Herman Avenue, San Diego 4, California
Although I'm only 14 years old, I have been interested in steam engines for years. My father and grand-father were both steam threshermen. My grandfather threshed first with a 16 hp. Nichols & Shepard, then a 22 hp. Avery Undermounted, then a 22 hp. Minneapolis compound. My father ran the Minneapolis engine 7 years until they started threshing with a tractor. My family and I usually go to a steam engine Reunion every year. We have been going to the Mississippi Valley Old Time Threshers Reunion for the past few years.
Enclosed is a picture of a small Jensen engine that I got for Christmas a couple of years ago belted to a small model of a Baker Fan that I built from my Erector Set.
MICHAEL ALTHOFF 328 W. Chestnut Street Freeport, Illinois
Since the steam is fast running down, I thought I would write you a few lines, while shoveling on the coal. I've just come of age in your steam minded group by procuring a real live steamer and I suspect a lot of grief along with the fun. The boiler is the worse of the deal, as not only needs reflueing (already have the old ones out' shhh I used a cutting torch, split the ends, cut them in half and pulled the halves out
the upper hand holes), but to build up the lower shell sheet around the lower hand holes I' m also going to use my electric welder and run a bead along all the seams, this may seem sacrilege, but I'd like to maintain about 150 lbs. as the boiler sits even with new flues I would be afraid of anything over 85 pounds.
The engine is a typical vertical with no reverse, the latter I can fast secure by whipping up a 1913 Reeves reverse, which to make, all you need is (a) a drill press, (b) strap iron, and (c) bolts, and there you are, a Reeves Reverse.
DALE M. PERRILL 5080 Winkler Mill Road. Rochester, Michigan
Please find enclosed two dollars to cover my subscription to your wonderful little magazine. I have sawed between two and three hundred thousand feet of lumber this spring and summer with my Sawyer-Massey traction engine and will have more later on.
In one of your recent issues of the ALBUM you showed a picture of a Sawyer-Massey engine in New York State and in the article stated that Sawyer-Massey built their last engine in 1918. I am afraid that some one gave you some wrong information as I have two Sawyer-Massey engines and the one that I am using on the sawmill at present, had the original factory inspection stamp still on the boiler when I bought it four years ago, and it was dated 1920, so that my engine was built in 1920 and I know of another boiler an dengine that was built and sold in 1921, so that it was after that, that Sawyer-Massey stopped building engines at Hamilton, Ontario. I have been told that it was around 1924 to 1926.
My older engine was built in November 1913 and sold in 1914 and rebuilt by the John Goodison Co., of Sarnia, and my father and I bought from them in 1928 and I ran it till December 1955 and with some boiler repairs, it would still run.
Hoping that you and your readers will appreciate this information about Sawyer-Massey engines, as I have owned three different Sawyer-Massey engines in the past thirty one years.
GEORGE SEARSON Box 134, Watford, Ontario, Canada