Farm Collector

POST CARD

By Staff

(Vice President and Gen. Manager of Danuser Machine Works,
Inc.)

Mr. and Mrs. W. W. Danuser pleased with a good engine.

This is the same engine that was written up several years ago on
out-pulling the D-7 Caterpillar. She was built in 1916 and is now
located in Oklahoma.

Here is a photo of my 3 inch scale traction which I finished
about 2 years ago. It is a free-lance model with 2 cylinders 2′
x 2-3/8′ 2 speeds, final drive by chain and runs about 2 mph in
low gear with the engine revving 550 rpm.

On this engine everything except the cyl-block was built up by
welding and brazing, as I do not like pattern making for one off
jobs.

I would like to have this picture reproduced in your magazine,
just to show your nice fellows that here in Austria the enthusiasm
for steam is still alive. Many thanks in advance!

Next>>

  • Published on May 1, 1963
© Copyright 2022. All Rights Reserved - Ogden Publications, Inc.