I have threshed nearly all my life. When I was a boy my father
owned two horsepower threshing outfits and I did drive the horses
on the power on many occasions.
In the year 1902, my father purchased his first new steam
outfit, a Case 15 hp and a 32 in. cyl Case wooden separator, self
feeder, straw blower and weighter.
I had two brothers, 9 and 11 years older than I and all three of
us followed the harvest doing custom threshing in Washington,
Republic, Clay and Cloud county in Kansas, also some in Nebraska.
Our threshing outfits were always in A-1 condition and were always
The last real grain threshing I did was in 1952. I threshed a
job of stacked oats, however I have threshed small amounts of grain
for exhibition purposes (wheat and oats), but I threshed a good
deal of alfalfa and sweet clover after grain threshing ceased, due
I wonder what C.O.D. stands for-let us know if you have the
Exact to the original length 6’2′ x 2’9′ wide.
Weight 51/4cwt. Coal fired, multi-tubular boiler. Tested 200 water
pressure steam at 60 psi. Boiler holds 4 gallon. Tender tank 5
gallons. Burns anything. Boiler fed by pump, two speed. Mechanical
lubricator. Fencing compulsion by low cylinder. Bore three inches,
by four inches stroke. Stephenson Link Valve Gear runs non stop at
Rallies 10 AM to 6 PM.
(Please see letter from George W. Eves).
During the thirties, I ‘engineered’ several smaller gas
rigs. One was a 24 in. IHC separator with a McCormick-Deering 10-20
tractor for power and the other was a 28 in. Red River Special
separator and a 15-30 McCormick tractor. On our farm we had one of
the first McCormick Deering 15-30s in the area and it was used
until 1937, mostly for plowing, silo filling, etc.
Since 1942 I have been an aircraft mechanic, but on our acreage
I have a 1937 F-20 Farmall for a pet.