The Shenandoah Steam and Gas Engine Association Report


| November/December 1973



22 Geiser Engine

Picture is Ralph Lewyn, right on his 22 Geiser. Courtesy of William E. Hall Santini Road, Burtonsville, Maryland 20730

William E. Hall

15700 Santini Road, Burtonville, Maryland 20730

After some problems getting things organized in advance, we succeeded in putting on one of the best shows we have ever had. We have the usual problems of getting enough help in advance, and in transporting the engines, but it all 'came out in the wash' as the old saying goes. One of our officers remarked to me, 'I think we should put up a sign that reads like this. As a member, what have you done for your club in the last year.' However, I think the crowds were as big or bigger than ever for our 13th show.

OUR show is usually held the last full week-end in July, a Friday, Saturday, and Sunday. The location is the grounds of the Ruitan Club in Berryville, Va. which are well shaded, with plenty of permanent buildings. Berryville is located in the beautiful Shenandoah Valley of Va. After 2 years of poor weather, we had 3 slightly warm, but beautiful days.

Due mainly to transportation difficulties, we did not have quite as many large traction engines as some years, but we had a large variety of makes. We had 10 traction engines including an 1884 Garr-Scott, two 'S' Geisers, a Russell, a Farquhar, a 'ZZ' Geiser, a CASE, 2 Frick twins, and an Aultman-Taylor.

We had a good supply of young engineers and helpers, ranging in age from early teens to the 70's and younger. These included one of my helpers, who at 13 can safely tend and maintain my 20hp. Aultman-Taylor, including loading it onto a tractor trailer by himself. I consider him to be an exception in skill, at 13, and am proud to be one of his instructors.

We also had some nice homemade engines and a portable. Our gas tractors and small gas engines were to numerous to list, but they put on an excellent display. We also had many miscellaneous displays, including models, a working blacksmith shop, foundry making small castings, a good sized flea market and many more. Between our wagon rides behind a steam engine, and gas tractors running about, the sawmill, shingle mill, and thresher, several things were usually in operation at the same time all during the day. OUR FOUNDRY AND BLACKSMITH SHOP were kept busy during the day making souvenirs. We also had a live steam railroad giving rides to the kiddies and quite a few adults. There were also helicopter rides over the show grounds, Berryville, and the valley, along with pony cart rides.